Siemens SINUMERIK Series Operating Manual page 866

Hide thumbs Also See for SINUMERIK Series:

Table of Contents

HT 8 (840D sl only)

18.3 Machine control panel menu

Softkeys on the machine control panel menu

Available softkeys:

"Machine" softkey

"[VAR]" softkey

"1... n CHANNEL"

"Single Block" soft‐

"WCS MCS" softkey Switch between WCS and MCS

"Back" softkey

The window will automatically disappear when changing regions areas with the <MENU

SELECT> key.

Select the "Machine" operating area

Select the axis feedrate in the variable increment

Changing the channel

Switch single block execution on/off

Close window

Operating Manual, 08/2018, 6FC5398-7CP41-0BA0