Siemens SINUMERIK Series Operating Manual page 795

Data
Zero points for ShopMill programs
-- only available for job list with Shop‐
Mill and G code programs
Zero points for G code programs
-- only available for job list with Shop‐
Mill and G code programs
Basis reference
Directory
File name
Note
Magazine assignment
You can only read out the magazine assignments if your system provides support for loading
and unloading tool data to and from the magazine.
Procedure
...
Milling
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
Setting options
● No
The selection box "Basis zero point" is hidden
● All used in the program
● Complete tool list
● No
The selection box "Basis reference" is hidden
● All
● No
● Yes
The directory is displayed, in which the selected program is
located.
You have the option of changing the suggested file names.
1. Select the "Program Manager" operating area.
2. Position the cursor on the program whose tool and zero point data
you wish to back up.
3. Press the ">>" and "Archive" softkeys.
4. Press the "Setup data" softkey.
The "Backup setup data" window opens.
5. Select the data you want to back up.
Managing programs
14.17 Setup data
795