Siemens SINUMERIK Series Operating Manual page 54

Introduction
2.4 User interface
Calculating trigonometric functions
...
Further mathematical functions
Press the keys in the specified order:
Square number
Square root
Exponential function
Base number
Residue class calculation
Number
Absolute value
Integer component
Conversion between millimeters and inches
54
1. Check whether the angles are specified in radians "RAD" or in degrees
"DEG".
2. Press the "RAD" key to calculate the trigonometric functions in degrees
"DEG".
The designation of the key changes to "DEG".
- OR -
Press the "DEG" key to calculate the trigonometric functions in radian.
The designation of the key changes to "RAD".
3. Press the key for the desired trigonometric function, e.g. "SIN".
4. Enter the numerical value.
Num‐
ber
Num‐
ber
Exponent
Divider
Num‐
ber
Num‐
ber
1. Enter the numerical value.
2. Press the "MM" key to convert inches to millimeters.
The key is highlighted in blue.
- OR -
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
Milling