Siemens SINUMERIK Series Operating Manual page 509

6. Steps 4 and 5 are repeated until the programmed spigot depth is reached.
7. The tool moves back to the safety clearance in rapid traverse.
Procedure
Parameters in the "Input complete" mode
Parameters, G code program
Input
PRG Name of the program to be generated
PL Machining plane
Milling direction
● Climbing
cutting
● Conventional
cutting
RP Retraction plane
SC Safety clearance
F Feedrate
Parameter Description
Machining The following machining operations can be selected:
● ∇ (roughing)
● ∇∇∇ base (base finishing)
● ∇∇∇ edge (edge finishing)
● Chamfering
Z0 Reference point in the tool axis Z
Z1 Pocket depth (abs) or depth relative to Z0 (inc)
- (only for ∇, ∇∇∇ base or ∇∇∇ edge)
DXY
● Maximum plane infeed
● Maximum plane infeed as a percentage of the milling cutter diameter
- (only for ∇ and ∇∇∇ base)
DZ Maximum depth infeed – (only for ∇ or ∇∇∇ edge)
Milling
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
1. The part program or ShopMill program to be processed has been created
and you are in the editor.
2. Press the "Contour milling" and "Spigot" softkeys.
The "Mill spigot" input window opens.
3. Select the "Roughing" machining type.
● complete
mm
mm
mm/min
Programming technological functions (cycles)
Parameters, ShopMill program
T Tool name
D Cutting edge number
F Feedrate
S / V Spindle speed or constant cutting
rate
10.3 Contour milling
mm/min
mm/tooth
rpm
m/min
Unit
mm
mm
mm
%
mm
509