Changing File And Directory Properties - Siemens SINUMERIK 840D SL Operating Manual

Managing programs

14.11 Changing file and directory properties

14.11 Changing file and directory properties
Information on directories and files can be displayed in the "Properties for ..." window.
Information on the creation date is displayed near the file's path and name.
You can change names.
Changing access rights
Access rights for execution, writing, listing and reading are displayed in the "Properties"
window.
● Execute: Is used for the selection for execution
● Write: Controls the changing and deletion of a file or a directory
For NC files, you have the option to set the access rights from keyswitch 0 to the current
access level, to be set separately for each file.
If an access level is higher than the current access level, it cannot be changed.
For external files (e.g. on a local drive), the access rights are displayed to you only if settings
have been executed for these files by the machine manufacturer. They cannot be changed
via the "Properties" window.
Settings for the access rights to directories and files
Via a configuration file and MD 51050, access rights of the directories and file types of the
NC and user memory (local drive) can be changed and pre-assigned.
References
A detailed description of the configuration can be found in the following documentation:
Commissioning Manual SINUMERIK Operate (IM9) / SINUMERIK 840D sl
Procedure
594
1. Select the program manager.
2. Choose the desired storage location and position the cursor on the file
or directory whose properties you want to display or change.
Operating Manual, 02/2012, 6FC5398-7CP40-3BA0
Milling