Siemens SINUMERIK Series Operating Manual page 725

Parameter
Geometry
Wear
Geometry
Wear
Type 240 - tap
Pitch
Type 200 - twist drill, type 220 - centering tool and Type 230 - countersink
Tip angle
Type 520 -plunge cutter, type 530 - parting tool, type 540 - threading tool
Cutting tip length
Cutting tip width
Type 110 - ball end mill for cylindrical die-sinking cutter, type 111 - ball end mill for tapered die-sinking cutter, type 120 - end
mill, type 121 - end mill with corner rounding, type 130 - angle head cutter, type 140 - facing tool, type 150 - side mill, type
155 - bevel cutter, type 156 - bevel cutter with corner rounding and type 157 - tapered die-sinking cutter
N
For driven tools (drills and milling tools)
Direction of
spindle rotation
Cutting edge OEM
parameters 1 - 2
Milling
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
Meaning
Length
Tool length
Tool wear
Ø (diameter)
Tool diameter
Tool wear, diameter
Height of the developed helix parallel to the screw axis
Angle is less than 180°
For displaying the tools during the simulation of the program execu‐
tion.
Width of the plunge cutter
Number of teeth
Spindle is not switched on
CW spindle rotation
CCW spindle rotation
Coolant 1 and 2 (e.g. internal and external cooling) can be switched
on and off.
Please refer to the machine manufacturer's specifications
Software option
In order to be able to manage the parameter spindle direction of rotation, coolant
and tool-specific functions (M1-M4), you require the "ShopMill/ShopTurn" op‐
tion.
Tool management
13.9 Tool details
725