Siemens SINUMERIK Series Operating Manual page 573

Parameter
DIR
(only G code program)
S (only G code pro‐
gram)
V (only G code pro‐
gram)
SV
X0
Z0
FS or R
X1
FR
SR
X2
* Unit of feedrate as programmed before the cycle call
Milling
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
Description
Direction of spindle rotation
Spindle speed
Constant cutting rate
Maximum speed limit - (only for constant cutting rate V)
Reference point in X ∅ (abs, always diameter)
Reference point in Z (abs)
Chamfer width or rounding radius
Depth for speed reduction ∅ (abs) or depth for speed reduction in relation to X0 (inc) mm
Reduced feedrate
Reduced speed
Final depth ∅ (abs) or final depth in relation to X1 (inc)
Programming technological functions (cycles)
10.4 Turning - milling/turning machine
Unit
rpm
mm/min
rpm
mm
mm
mm
*
rpm
mm
573