Download  Print this page

Text Files; Text Directory - Makefile; System List Directory File - Sy_l_dir.h - Siemens SINUMERIK 840D Operator's Manual

Hide thumbs

Advertisement

Development Kit (EU)
4 Extending the Application Configuration
4.1.6

Text files

Description
pj.txt
ps.txt
gl.txt
4.1.7
Text directory – Makefile
Description
4.1.8
System list directory file – sy_l_dir.h
Description
Note
EU/4-32
The text files are stored in the directories L:\proj\text\pj\d,g,e,f,i.
A distinction is made between the following three text files:
In L:\proj\text\pj\d, g, e, f, i:
Texts for application configuration
In L:\proj\text\pj\d, g, e, f, i:
Texts which are required in the standard configuration.
In L:\proj\text\pj\d, g, e, f, i:
Texts which are required in both the standard configuration and the
application configuration.
In L:\proj\text\al\makefile and L:\proj\text\pj\makefile:
In these two makefiles you can specify with the letters D, G, F, E, I
which language directories are searched during the generation of
configuration and alarm texts.
The system list directory file is located in L:\proj\h\sy_l_dir.h.
The system list directory contains all list pointers for the lists of the
base system (for switching between the standard user area and the
applications user area) which are included in the binary configuration
file - proj.dat.
The starting point for the interpretation of the binary configuration file is
the first configuration list in the system list directory.
Changes to the system list directory should only be made by
experienced users.
SINUMERIK 840D/810D Configuring the Operator Interface OP 030 (FBO) – 09.01 Edition
© Siemens AG, 2001. All rights reserved
09.01

Advertisement

This manual also for:

Sinumerik 810d

Comments to this Manuals

Symbols: 0
Latest comments: