Siemens SINUMERIK Series Operating Manual page 524

Programming technological functions (cycles)
10.4 Turning - milling/turning machine
G code program (undercut, form E) parameters
PL Machining plane
SC Safety clearance
F Feedrate
Parameter
TC
Retraction
(for ShopMill program)
ZR
(for ShopMill program)
Align tool through beta and gamma angles
524
Press the "Undercut form E" softkey.
The "Undercut form E (DIN 509)" input window opens.
- OR -
Press the "Undercut form F" softkey.
The "Undercut form F (DIN 509)" input window opens.
mm
*
Description
Name of the swivel data set
Note: The selection box only appears if more than one swivel data set has been set
up.
● No
The axis is not retracted before swiveling
● Z
Retraction in the direction of machine axis Z
● Z,X,Y
Move machining axes to retraction position before swiveling
● Tool direction, max.
Maximum retraction (up to the software end position) in the tool direction
● Tool direction, inc.
Incremental retraction (specified retraction distance, up to the software end
position) in the tool direction
When retracting in the tool direction, in the swiveled machine state, several axes
can move (travel).
Retraction path - only for incremental retraction in
T
D Cutting edge number
F Feedrate
S / V Spindle speed or
Constant cutting rate
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
mm/min
mm/rev
rpm
m/min
Unit
mm
Milling