Siemens SINUMERIK Series Operating Manual page 187

Parameters
Machining
direction
X0
Z0
X1
Z1
FS1...FS3 or R1...R3
XF2
D
UX
UZ
Milling
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
5.8 Simple workpiece machining operations with milling/turning machines
Description
● Face
● Longitudinal
Reference point ∅ (abs)
Reference point (abs)
End point X ∅ (abs) or end point X in relation to X0 (inc)
End point Z (abs) or end point Z in relation to X0 (inc)
Chamfer width (FS1...FS3) or rounding radius (R1...R3)
Undercut (alternative to FS2 or R2)
Infeed depth (inc) – (for roughing only)
Final machining allowance in X direction (inc) – (for roughing only)
Final machining allowance in Z direction (inc) – (for roughing only)
Execution in manual mode
Unit
mm
mm
mm
mm
mm
mm
mm
mm
mm
187