Siemens SINUMERIK Series Operating Manual page 600

Programming technological functions (cycles)
10.5 Contour turning - Milling/turning machine
G code program parameters
PRG Name of the program to be gener‐
ated
PL Machining
plane
RP Retraction
plane – (only for
machining di‐
rection, longitu‐
dinal, inner)
SC Safety clear‐
ance
F Feedrate
CON Name of the updated unma‐
chined-part contour for residual
material machining (without the
attached character "_C" and dou‐
ble-digit number)
Residual mate‐ With subsequent residual materi‐
rial al removal.
● Yes
● No
CONR Name to save the updated unma‐
chined-part contour for residual
material removal - (only "Yes" for
residual material removal).
600
mm
mm
*
ShopMill program parameters
T Tool name
D Cutting edge
number
F Feedrate
S / V Spindle speed
or
constant cut‐
ting rate
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
mm/min
mm/rev
rpm
m/min
Milling