Siemens SINUMERIK Series Operating Manual page 299

Parameter screen with graphic view
Note
Switching between the help screen and the graphic view
The key combination <CTRL> + <G> is also available for the switchover between the help
screen and the graphic view.
Figure 8-3
See also
Editor settings (Page 222)
Milling
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
Press the "Graphic view" softkey to toggle between the help screen and
the graphic view.
Parameter screen with a graphical view of a G code program block
Generating a G code program
8.2 Program views
299