Siemens SINUMERIK Series Operating Manual page 363

8. Drilling/centering
9. Drilling/reaming
Milling
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
1. Press the "Drilling" and "Centering" softkeys.
The "Centering" input window opens.
2. Enter the following technology parameters:
T Center‐
ing_tool_10mm
3. Enter the following parameters:
Diameter/tip
∅
DT
4. Press the "Accept" softkey.
1. Press the "Drilling", "Drilling reaming" and "Drilling" softkeys.
The "Drilling" input window opens.
2. Enter the following technology parameters:
T DRILL10
3. Enter the following parameters:
Diameter/tip
Z1
Predrilling
Through drilling
DT
4. Press the "Accept" softkey.
Creating a ShopMill program
9.18 Example, standard machining
D1 F 1000 mm/min
Diameter
5
0.6 s
D1 F 500 mm/min
Tip
-25abs
No
No
0
S 12000 rev/min
S 1600 rev/min
363