Siemens SINUMERIK Series Operating Manual page 699

Column heading
Width/
Tip width/
Tip angle /
Pitch
Drilling radius
N
Tip length
M1 - M4
Further parameters
If you have set up unique cutting edge numbers, these are displayed in the first column.
Column heading
D no.
SN
EC
Milling
Operating Manual, 08/2018, 6FC5398-7CP41-0BA0
Meaning
Cutting edge for Type 150 - side milling cutter and Type 151 - saw
Tip width for Type 520 - plunge cutter and Type 530 - cut-off tool
Tip angle for Type 200 – twist drill and Type 220 – centering tool and Type
230 – countersink
Pitch for Type 240 - tap
Drilling radius for Type 560 - rotary drill. Holder angle and cutting tip angle
are fixed.
Cutting edge graphic
The cutting edge graphic shows the positioning defined by the holder angle,
cut direction and cutting tip angle.
Holder angle for Type 500 - rougher and Type 510 - finisher.
The reference direction for the holder angle specifies the cut direction.
In addition to the holder angle, the cutting tip angle is also specified.
Number of teeth for Type 100 - milling tool, Type 110 - ball end mill for
cylindrical die-sinking cutter, Type 111 - ball end mill or tapered die-sinking
cutter, Type 120 - end mill, Type 121 - end mill with corner rounding, Type
130 - angle head cutter, Type 131 - angle head cutter with corner rounding,
Type 140 - facing tool, Type 150 - side mill, Type 155 - bevel cutter, Type
156 - bevel cutter with corner rounding and Type 157 - tapered die-sinking
cutter.
Tip length of a cutting tool or grooving cutter
The tip length is required for displaying the tools during the simulation of
the program processing.
Direction of spindle rotation
Spindle is not switched on
CW spindle rotation
CCW spindle rotation
Coolant 1 and 2 (e.g. internal and external cooling) can be switched on and
off.
The coolant infeed at the machine does not necessarily have to be set-up.
Other tool-specific functions such as additional coolant infeed, monitoring
functions for speed, tool breakage, etc.
Meaning
Unique cutting edge number
Cutting edge number
Setup offsets
Display of the existing setup offsets
Tool management
13.5 Tool list
699