Xerox WorkCentre 7132 Service Documentation page 80

005-115 Belt DADF Exit Sensor On Dynamic Jam
BSD-ON:5.4
Exit Sensor does not turn On in specified time from start of original document output operation.
Procedure
When the problem occurs frequently, check if there is any area in document path that interferes
with document feed. If OK, check connectors and wiring for damage. If the problem continues,
replace Exit Sensor (PL 16.7). If the problem persists, replace the DADF PWB (PL 16.3).
Revision
WorkCentre 7132
005-116 Belt DADF Exit Sensor Off Dynamic Jam
BSD-ON:5.4
Exit Sensor does not turn Off in specified time from start of original document output operation.
Procedure
When the problem occurs frequently, check if there is any area in document path that interferes
with document feed. If OK, check connectors and wiring for damage. If the problem continues,
replace Exit Sensor (PL 16.7). If the problem persists, replace the DADF PWB (PL 16.3).
January 2007
2-57
Status-indicator-raps
005-115, 005-116