Xerox WorkCentre 7132 Service Documentation page 127

005-911 DADF Exit 1 Sensor Static Jam
Exit1 Sensor On detected at the timing below:
1. Power On
2. Feeder Cover Interlock Close
3. Platen Interlock Close.
Procedure
If the problem occurs frequently, make sure that there is no obstacle blocking the light path on
Exit1 Sensor. Check the connections between the Exit1 Sensor and the DADF PWB. If OK,
replace the Exit1 Sensor. If the problem persists, replace the DADF PWB (PL 16.3).
Status-indicator-raps
005-911, 005-912
005-912 DADF Exit 2 Sensor Static Jam
Exit2 Sensor On detected at the timing below:
1. Power On
2. Feeder Cover Interlock Close
3. Platen Interlock Close.
Procedure
If the problem occurs frequently, make sure that there is no obstacle blocking the light path on
Exit2 Sensor. Check the connections between the Exit2 Sensor and the DADF PWB. If OK,
replace the Exit2 Sensor. If the problem persists, replace the DADF PWB (PL 16.3).
January 2007
2-104
Revision
WorkCentre 7132