Xerox WorkCentre 7132 Service Documentation page 104

005-157 CVT Holed Paper Invert Sensor Off Jam
BSD-ON:5.4
Invert Sensor does not turn Off in specified time from Invert Sensor On in holed document
mode.
Procedure
Ensure that a point on circumference (farthest from trail edge), not a center, of a hole on trail
edge side is 19mm or less from trail edge.
Revision
WorkCentre 7132
005-158 CVT Holed Paper Exit 2 Sensor Off Jam
BSD-ON:5.4
Exit 2 Sensor does not turn Off in specified time from Exit 2 Sensor On in holed document
mode.
Procedure
Ensure that a point on circumference (farthest from trail edge), not a center, of a hole on trail
edge side is 19mm or less from trail edge.
January 2007
2-81
Status-indicator-raps
005-157, 005-158