Xerox WorkCentre 7132 Service Documentation page 77

003-981 Staple Size RAP
Stapling could not be done for the selected paper size.
Procedure
Ask customer to correct the job setups and rerun the job.
Status-indicator-raps
003-981, 003-982
003-982 IIT HDD Access Error RAP
BSD-ON:3.1/6.2
There is a problem with IIT accessing the Hard Drive.
Procedure
Disconnect and reconnect the IIT/IPS PWB Harness.
Check HDD electrical connections (PL 11.2).
If the problem persists reload Software (ADJ 9.3.1).
If the problem persists perform Hard Disk Diagnostic Program. If the problem persists perform
GP 6 Special Boot Modes HDD Initialization.
If the problem persists, replace the IIT/IPS PWB (PL 13.3).
January 2007
2-54
Revision
WorkCentre 7132