Xerox WorkCentre 7132 Service Documentation page 53

003-336 IISS-ESS Communication 17 RAP
BSD-ON:3.1/6.2
The NAK that notifies of the occurrence of a transmission failure is received. (After the header
was recognized, it was detected that receiving was aborted.)
Procedure
Disconnect and reconnect the IIT/IPS PWB Harness.
Reload Software (ADJ 9.3.1).
If the problem persists, replace the IIT/IPS PWB (PL 13.3).
Status-indicator-raps
003-336, 003-337
003-337 IISS-ESS Communication 18 RAP
BSD-ON:3.1/6.2
After restoring from Power Saver mode, there was no response to the Power On command
sent to the IIT/IPS PWB within the specified time.
Procedure
Disconnect and reconnect the IIT/IPS PWB Harness.
Reload Software (ADJ 9.3.1).
If the problem persists, replace the IIT/IPS PWB (PL 13.3).
January 2007
2-30
Revision
WorkCentre 7132