Setting Time And Date; User List And Access Levels; Logging In - Symmetricom TSG-3800 Series User Manual

To change the Ethernet settings, see
Once the settings are complete, you can use a terminal emulation program to telnet
into the IP address and log in using a user name and password.

Setting Time and Date

Set the time and date using the terminal equipment. If you do not set the time, the
TSG-3800 defaults to a known time. To change the date and time settings, see
Setting the Time and

User List and Access Levels

The TSG-3800 software provides for four levels of users:
Administrator or System (Level 4)
Supervisor (Level 3)
Technician (Level 2)
User (Level 1)
Each level provides a different amount of access to and control of the unit. Logging
in at the Administrator level allows you to assign user levels and passwords to
people who need access to the unit. The TSG-3800 stores this list of users and their
passwords in non-volatile memory. You can also modify the user list and execute all
commands, including commands that affect system performance, for instance, clock
operating mode. The Supervisor level allows you to execute all commands except
for saving the user configuration. The Technician level allows you to perform basic
configuration commands. The User level only allows execution of non-critical
commands.
If you do not define a user list, the TSG-3800 accepts all commands from anyone
who connects to the unit.
For information and procedures on managing the user list in the TSG-3800, refer to
Setting Up User

Logging In

Logging in to the TSG-3800 is only required when a system administrator has
added users to the system. Initially, to add users you must physically connect to the
TSG-3800. Refer to
connections to the ports. Once a connection is established, a user must log in to
access the system. To log in at the system prompt:
12778474-002-2 Revision F – March 2004
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Setting Ethernet
Date, on page 319.
Accounts, on page 312.
EIA-232 Communications, on page 59, for details on making
Operating the TSG-3800
User List and Access Levels
Parameters, on page 318.
TSG-3800 User's Guide 81