Retrieve Commands; Retrieve Alarms - Symmetricom TSG-3800 Series User Manual

Retrieve Commands

Each Retrieve command submitted by the user causes the TSG-3800 to respond
with the Complied message and a response message that contains the requested
data.
Valid <tid> code: the assigned tid (see SET-TID; the default TID is TSG) or null. If
null, the TSG-3800 requires the <aid>.
Valid <aid> code:
Null (no characters). If null, the TSG-3800 requires the <tid>
ID00000

Retrieve Alarms

The Retrieve Alarms command reports all active alarms from the TSG-3800 or from
the selected module. The text_block contains the highest-severity alarm level of all
alarms in the list, and contains the most recent alarms.
If the TSG-3800 successfully receives the command, it returns the COMPLD
message. If it does not successfully receive the command, it returns the DENY
message.
Command Syntax
Response Format
Valid aid
Minimum User Level
Example Command
Example Response
12778474-002-2 Revision F – March 2004
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
RTRV-ALMS:[tid]:[aid]:ctag;
^^^"aid:ntfcncde,condtype,srveff,\"condscr\""
<cr><lf>
CPU, INPx[-y], CLKA, CLKB, FGA, FGB
1
RTRV-ALMS:TSG:CLKA:ctag;
TSG 02-09-25 03:01:36
M 1 COMPLD"
"A ,00,00,00,00,00"
or
TSG 02-09-15 09:57:25
M 1 COMPLD"
"*C,03,18,"
;
TL1 Reference
Retrieve Commands
TSG-3800 User's Guide 389