System Commands; Recalling Events - Symmetricom TSG-3800 Series User Manual

System Commands

Recalling Events

The TSG-3800 time and date stamps each event. A listing of up to the last 500
events is available. Use the syntax described in
To display the last event, type:
EVENT
A typical display is:
->EVENT
«date» «time» Minor Alarm Active
->
Listing Latest Multiple Events
The listing of multiple events starts with the most recent event first.
To list the last n events, type:
EVENT {number}
where
{number}
Example
Purpose: List last five events.
Command:
EVENT 5
Display:
->EVENT 5
«date» «time» «oper» Enabled Clk A
«date» «time» «oper» Set «input» LOS Clear Limit to 2, Was 1
«date» «time» Reference Input Valid
«date» «time» Clk A Entered Locked
«date» «time» «input» LOS Fault Cleared
->
Listing Previous Events
To list the last n events without displaying the latest previous events, starting m
events back, type:
EVENT {m} {number}
12778474-002-2 Revision F – March 2004
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
then press Enter
then press Enter.
is between 1 and 500
then press Enter
Operating the TSG-3800
System Commands
Enable Command, on page 346.
TSG-3800 User's Guide 103