Set Date; Set Disable - Symmetricom TSG-3800 Series User Manual

When the TSG-3800 successfully receives the command and if the aid is valid, it
returns the COMPLD message. If the TSG-3800 does not successfully receive the
command, it returns the DENY message.
Command Syntax
Valid aid
Minimum User Level
Example Command
Example Response

Set Date

The Set Date command sets the date stored in the TSG-3800.
When the TSG-3800 successfully receives the command, it returns the COMPLD
message with the new date and time in the header. If the TSG-3800 does not
successfully receive the command, it returns the DENY message.
Command Syntax
Valid aid
Minimum User Level
Example Command
Example Response

Set Disable

The Set Disable command disables the specified Clock module, Frame Generator
module, Input module, or input port. The aid TL1_SECU disables the need to use a
valid user name and password to log in to a TL1 connection.
When the TSG-3800 successfully receives the command and if the aid is valid, it
returns the COMPLD message. If the TSG-3800 does not successfully receive the
command, it returns the DENY message.
Command Syntax
Valid aid
12778474-002-2 Revision F – March 2004
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
SET-CLK:[tid]:[aid]:ctag;
CLK A, CLK B
SET-CLK:TSG:CLK A;
TSG 02-09-06 11:26:20
M 1 COMPLD
;
SET-DAT:[tid]::ctag::date^time;
must be null
date^time = YY-MM-DD^HH:MM:SS, where ^ can be a space
or a comma and the time separator can be colons or dashes
2
SET-DAT::ctag:08-28-02,15:25:00;
TSG 02-08-28 15:25:00
M 13 COMPLD
;
SET-DIS:[tid]:[aid]:ctag;
CLKx, FGx, INPx, INPx[-y], TL1_SECU
TL1 Reference
Set Commands
TSG-3800 User's Guide 379