Retrieve Delay Parameter - Symmetricom TSG-3800 Series User Manual

Response Format
Example Command
Example Response

Retrieve Delay Parameter

The Retrieve Delay Parameter command reports the delay time for SSM messages.
If the TSG-3800 successfully receives the command, it returns the COMPLD
message. If the TSG-3800 does not successfully receive the command, it returns
the DENY message.
Command Syntax
Valid aid
Minimum User Level
Response Format
Example Command
Example Response
12778474-002-2 Revision F – March 2004
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
<cr><lf><lf>
M^ctag^COMPLD<cr><lf>
^^^aid:mode,tau,ar,sel,clktype<cr><lf>
where:
mode is Warm|Hold|Acq|Lock
tau is a number indicating the final time constant value in
seconds
ar indicates whether AutoReturn is on or off
sel is {sel} for the selected clock
clktype is
ST2Rub|ST2DDS|ST2|ST2.1|ST2.1DDS|ST3EDDS|
Ext.Ref
RTRV-PRMTR-CLK:TSG:CLKB:ctag;
TSG 02-09-10 19:00:19
M 13 COMPLD
^^^TSG:Lock,0,Off,Sel,ST2Rub
;
RTRV-PRMTR-DELAY:[tid]::ctag;
none
2
<cr><lf><lf>
M^ctag^COMPLD<cr><lf>
^^^delay<cr><lf>
where:
delay is the time in seconds before a new incoming SSM
appears on the output
RTRV-PRMTR-DELAY:TSG::ctag;
TSG 02-09-10 19:00:19
M 13 COMPLD
^^^TSG:5
;
TL1 Reference
Retrieve Commands
TSG-3800 User's Guide 407