Single-Port Input Module - Symmetricom TSG-3800 Series User Manual

Input Modules

Single-Port Input Module

Single-Port Input Module

The Single-Port Input module (23478303-0x2-0) provides enhanced measurement
resolution and synchronous status message (SSM) reading in addition to the
combined capabilities of the current Input modules. This module allows you to
connect a single channel that can be used as a reference input or as a monitor-only
input. This module accepts DS1 (1.544 Mb/s) or E1 (2.048 Mb/s) framed AMI inputs
as well as Clock or Sine inputs at several frequencies.
panel of the module.
Note: This module requires the CPU module, item number
23478301-xxx-0, running S/W Revision C or higher.
The input signal type, format and termination impedance are user- selectable
parameters; you provision these parameters through one of the TSG-3800
Communications ports using the INP command described in
page 350.
150 TSG-3800 User's Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Figure 5-6 shows the front
Input Command, on
12778474-002-2 Revision F – March 2004