Command Reference - Symmetricom TSG-3800 Series User Manual

Command Reference

This section describes the complete syntax for each software command available in
the TSG-3800. For information on command structure and message displays, refer
to Software Commands, on page 323.
Alarm Command
Use this command to acknowledge, display, and clear alarms as well as turn off the
audio alarm and the alarm indicators on the front panel of the modules.
Level 0 Not applicable
Level 1
ALARM
Level 2
ALARM CLEAR [CRITICAL|MAJOR|MINOR|AUDIO|ALL]
Level 3 Same as Level 2 operation
Level 4 Same as Level 2 operation
Remarks None
Related
Restrictions None
Bye Command
Use this command to log the current user off the TSG-3800.
Level 0 Not applicable
Level 1
BYE
Level 2 Same as Level 1 operation
Level 3 Same as Level 1 operation
Level 4 Same as Level 1 operation
Remarks None
Related
LOGON
Restrictions None
12778474-002-2 Revision F – March 2004
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
System Administrator's Reference
Command Reference
TSG-3800 User's Guide 341