Retrieve Tdev - Symmetricom TSG-3800 Series User Manual

Retrieve TDEV

The Retrieve TDEV command reports the TDEV data from the specified port.
If the TSG-3800 successfully receives the command, it returns the COMPLD
message. If the TSG-3800 does not successfully receive the command, it returns
the DENY message.
Command Syntax
Valid aid
Minimum User Level
Response Format
Example Command
Example Response
12778474-002-2 Revision F – March 2004
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
RTRV-PD-TDEV:[tid]:[aid]:ctag[::start][:stop]
;
INPx[-y]
1
<cr><lf><lf>
M^ctag^COMPLD<cr><lf>
^^^"aid:ocrdat,ocrtim,TDEV"<cr><lf>
^^^tmper,monval[<cr><lf>
^^^tmper,monval...]"
;
where:
ocrdat and ocrtime are the actual date and time the data
were collected
TDEV describes the data that follows
tmper is the data measurement time period in seconds.
Maximum values are 0.05, 0.1, 0.25, 0.5, 1.0, 2.0, 4.0, 8.0,
16.0, 32.0, 64.0, 128.0, 256.0, 512.0, 1024.0. Only values
available in the interval between the start and stop time
are reported.
monval is the data value for the tmper in nanoseconds
RTRV-PD-TDEV:TSG:INP1:ctag;
TSG 02-09-10 19:00:19
M 13 COMPLD
^^^
;
TL1 Reference
Retrieve Commands
TSG-3800 User's Guide 401