Retrieve Phase Data; Retrieve Sql Data - Symmetricom TSG-3800 Series User Manual

Minimum User Level
Response Format
Example Command
Example Response

Retrieve Phase Data

The Retrieve Phase Data command reports the current 1 and 100 second average
phase readings for the specified input vs. the A and B clocks. The phase values are
in nanoseconds. If you specify more than one input (aid = All or <null>), the data for
each input port is on a separate line.
If the TSG-3800 successfully receives the command, it returns the COMPLD
message. If the TSG-3800 does not successfully receive the command, it returns
the DENY message.
Command Syntax
Valid aid
Minimum User Level
Response Format
Example Command
Example Response

Retrieve SQL Data

The Retrieve SQL Data command reports the current Sync Quality Level (SQL) for
the specified inputs. This value comes from the SSM, if available; if not, then it
comes from the provisioned value. See
the SQL definitions. If you specify more than one input (aid = All or <null>), the data
for each input port is on a separate line.
12778474-002-2 Revision F – March 2004
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
1
<cr><lf><lf>
M^ctag^COMPLD<cr><lf>
^^^"aid:MTIE,m100,m1000,m10000)"<cr><lf>
RTRV-DATA-MTIE:TSG:INP3-3:ctag;
TSG 02-09-10 19:00:19
M 13 COMPLD
^^^INP3-3:MTIE,158,204,212
RTRV-DATA-PHA:[tid]:[aid]:ctag;
INP, INPx, INPx[-y], ALL, <null>
1
<cr><lf><lf>
M^ctag^COMPLD<cr><lf>
^^^"aid:PHA,(a1),(b1),(a100),(b100)"<cr><lf>
RTRV-DATA-PHA:TSG:INP1:ctag;
TSG 02-09-10 19:00:19
M 13 COMPLD
^^^INP1:PHA,0,0,0,0
Set SQL, on page 387, for information on
TL1 Reference
Retrieve Commands
TSG-3800 User's Guide 395