Set Name; Set Reference - Symmetricom TSG-3800 Series User Manual

Example Command
Example Response

Set Name

The Set Name command applies the specified name to the TSG-3800. You can use
up to 10 characters for the name.
When the TSG-3800 successfully receives the command, it returns the COMPLD
message. If the TSG-3800 does not successfully receive the command, it returns
the DENY message.
Command Syntax
Valid aid
Minimum User Level
Example Command
Example Response

Set Reference

The Set Reference command sets the current input source to the specified input
port.
When the TSG-3800 successfully receives the command and if the aid is valid, it
returns the COMPLD message. If the TSG-3800 does not successfully receive the
command, it returns the DENY message.
Command Syntax
Valid aid
Minimum User Level
Example Command
Example Response
12778474-002-2 Revision F – March 2004
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
SET-EVNT:TSG:ALL:ctag;
TSG 02-05-16 14:36:46
M 14 COMPLD
;
SET-NAME:[tid]::ctag::name;
none
name: up to 10 characters or null
3
SET-NAME:TSG::ctag::TSG3800;
TSG3800 02-05-16 14:45:49
M 15 COMPLD
;
SET-REF:[tid]:[aid]:ctag;
INPx[-y]
For single-port Input modules x is 1–4 and y is always 1. For
three-port Input modules x is 1-4 and y is 1-3.
3
SET-REF:TSG:INP3-3:ctag;
TSG3800 02-05-16 14:51:32
M 15 COMPLD
;
TL1 Reference
Set Commands
TSG-3800 User's Guide 381