Installing The Card Guides; Card Guide Attached To Installation Tool - Symmetricom TSG-3800 Series User Manual

Figure 7-29. Installing the Card Guides
To install the card guides:
1. Clean the shelf where the upper and lower card guides are to be installed using
the self-saturating swab.
2. Mount the card guide onto the installation tool, as shown in
Figure 7-30. Card Guide Attached to Installation Tool
3. Remove the protective tape from the bottom of the card guide.
4. Align the card guide so that it is flush with the inner right side of the shelf and
under the rivet, as shown in
it to the shelf. Remove the installation tool.
12778474-002-2 Revision F – March 2004
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Figure 7-31. Press down on the card guide to secure
Output Modules
Output Fault Analyzer
Figure 7-30.
TSG-3800 User's Guide 293