Chapter 3 Operating The Tsg-3800 - Symmetricom TSG-3800 Series User Manual

Chapter 3 Operating the TSG-3800

The TSG-3800 family of timing signal generators is controlled primarily by software
command. This chapter provides detailed information and procedures that help you
to provision the operating parameters of the TSG-3800 to meet specific
requirements.
Note: To download and install new system software, refer to
Installing New System
In This Chapter:
Communications Settings
User List and Access Levels
Selecting the Input Reference Signal
Setting Up Input Reference Controls
Viewing Alarm Conditions
Provisioning the Clock Modules
System Commands
Default Parameter Values
12778474-002-2 Revision F – March 2004
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Software, on page 321.
TSG-3800 User's Guide 79