Logging In; Logging Out; Setting Up User Accounts - Symmetricom TSG-3800 Series User Manual

System Administrator's Reference

Setting Up User Accounts

7. Log back in as the new Administrator-level user to verify that the account exists
(repeat steps 3 and 4).
8. Type and press Enter to log off the TSG-3800.
bye

Logging In

Once you connect to the TSG-3800, you must log in to access the system.
To log in at the system prompt:
1. Enter a valid username and press Enter.
2. Enter the appropriate password and press Enter.
To log in as another user while you are already logged in:
1. Type
LOGIN «username»
2. Enter the appropriate password and press Enter.

Logging Out

The TSG-3800 software contains a time-out parameter (default of five minutes); the
unit automatically logs out the current user if you do not enter a command within the
"time-out" period. To restart the time-out period without entering a command, press
Enter. If the unit logs you off, you must log in again.
To disable the automatic logout feature, type:
DISABLE LOGOFF [A|B]
To logout manually, type:
then press Enter
BYE
Setting Up User Accounts
This section describes how to set up and maintain user accounts in the TSG-3800.
It includes the following sections:
Adding Users
Modifying a User's Data
Deleting a User
312 TSG-3800 User's Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
and press Enter.
then press Enter
12778474-002-2 Revision F – March 2004