Establishing Communications - Symmetricom TSG-3800 Series User Manual

System Administrator's Reference

Establishing Communications

Establishing Communications
This section describes the procedures to establish serial communications between
a computer, laptop, or terminal and the Comm A and Comm B ports on the
TSG-3800.
You need the equipment listed in
Table B-1. Required Equipment
Item #
1 A computer with a 3.5 in floppy disk drive.
2 A terminal emulation program, such as HyperTerminal, or ProComm Plus,
that can write (save) data to a file.
3
Straight-through 9-to-25 pin RS-232 cable for a serial connection.
4 The TSG-3800 Download Utility Program floppy disk, item number
14178418-000-5 (version C.03 or higher).
5
The applicable 3800 software upgrade disk (if you are upgrading software).
The serial port Comm A on the front of the CPU module
port to perform these procedures. The Comm B connector is on the rear panel of the
TSG-3800.
308 TSG-3800 User's Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Table B-1 to make a connection to the TSG-3800.
Item
(Figure
12778474-002-2 Revision F – March 2004
B-1) is a convenient