Unpacking And Inspecting The Tsg-3800; Before You Begin - Symmetricom TSG-3800 Series User Manual

Installing the TSG-3800

Unpacking and Inspecting the TSG-3800

Unpacking and Inspecting the TSG-3800
Unpack all equipment carefully and check it against the purchase order.
Caution: To avoid damage to unprotected components, use proper
static control precautionary measures when handling the modules.
Protect the equipment against electrostatic discharge (ESD) by using
a protective wrist-strap attached to ground and normal equipment
grounding.
Inspect the equipment for shipping damage, including bent or loose hardware,
broken connectors, or other visible defects. Notify Symmetricom and the carrier who
delivered the equipment if you suspect that it was damaged in transit.
Recommendation: Symmetricom recommends that you keep all
packaging materials in the event the system or components must be
returned or shipped to another location.

Before You Begin

Make sure that the following preparations are in place before installation.
Ensure that standard installation tools and materials are available, see
Installation Tools and
Ensure that the system location does not cause electromagnetic interference with
other equipment in the area, see
on page 49.
Ensure that the mounting rack or equipment cabinet is properly grounded and
has power available, see
Warning: To avoid the risk of shock, remove the fuses from the rear
panel before beginning the installation. The unit is not equipped with
a power on/off switch; both fuses must be removed to ensure the
system is not accidentally powered up.
Caution: To avoid electrostatic discharge (ESD) damage to
equipment, follow the ESD precautions as listed in this guide.
Recommendation: Follow all applicable local building electrical
codes when installing the TSG-3800.
48 TSG-3800 User's Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Materials, on page 49.
Electromagnetic Interference
Making Ground Connections, on page
Considerations,
53.
12778474-002-2 Revision F – March 2004