Displaying The Software Version; Naming The Tsg-3800 Target Identifier - Symmetricom TSG-3800 Series User Manual

System Administrator's Reference
Setting Communication Parameters

Displaying the Software Version

To display the current version of software installed in the TSG, type:
then press Enter
ID
A typical response from the TSG is:
TSG->id
Model 3800 Timing Signal Generator w/ Ethernet
Software Ver E.14
Created on Feb 26 2003 14:32:11
Copyright Symmetricom, 1999-2003
Customer Support:
Phone: 1(408)428-7907
1(888)367-7466 (Toll-free, US only)
Email: support@symmetricom.com

Naming the TSG-3800 Target Identifier

You can display, assign or remove a name to the TSG-3800. The name is also used
as the TL1 Target Identifier (TID). Once assigned, the name appears in front of the
prompt. This is useful when monitoring more than one TSG-3800.
To display the name, type:
NAME
A typical response from the TSG is:
TSG->NAME
The Unit Name is TSG.
TSG->
To assign a name, type:
NAME name
where name is a string of 1 to 20 characters.
To remove a name, type:
NAME NONAME
320 TSG-3800 User's Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Bootloader Ver E.00
then press Enter
then press Enter
then press Enter
12778474-002-2 Revision F – March 2004