Installing The Analog Output Module; Output Wiring Connections For The Analog Output Module; Primary And Secondary Distribution Slots - Symmetricom TSG-3800 Series User Manual

Output Modules
Analog Output Module

Installing the Analog Output Module

The Analog Output module is designed to operate in a non-redundant mode. Insert
the module in one of the primary distribution slots.
secondary distribution slots in the TSG-3800 series.
Table 7-21. Primary and Secondary Distribution Slots
Model
3800/3800E 18, 20
19-inch Shelves
3800 23-inch 18, 20, 22
Shelf
3800X/3800EX 4, 6, 8, 10, 12, 14, 16, 18, 20
19-inch Shelves
3800X 23-inch 4, 6, 8, 10, 12, 14, 16, 18, 20, 22, 24
Shelf
Making Signal Connections
The output signals are available at the 50-pin connectors located on the rear panel
of the shelf. Outputs one through ten are used by this module. Refer to
Output Signal
outputs as shown in
Table 7-22. Output Wiring Connections for the Analog Output Module
Channel
1
2
3
4
5
6
234 TSG-3800 User's Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Primary Distribution Slots
Connections, on page 56, for more information. Connect the six
Table 7-22.
Conductor
Center
Shield
Center
Shield
Center
Shield
Center
Shield
Center
Shield
Center
Shield
Table 7-21
Secondary Distribution Slots
19,21
19, 21, 23
5, 7, 9, 11, 13, 15, 17, 19, 21
5, 7, 9, 11, 13, 15, 17, 19, 21, 23, 25
Pin
28
3
31
6
34
9
37
12
40
15
43
18
12778474-002-2 Revision F – March 2004
lists the primary and
Making