Retrieve User - Symmetricom TSG-3800 Series User Manual

Response Format
Example Command
Example Response

Retrieve User

The Retrieve User command reports the user name and access level for the user
list stored in the TSG-3800.
If the TSG-3800 successfully receives the command, it returns the COMPLD
message. If the TSG-3800 does not successfully receive the command, it returns
the DENY message.
Command Syntax
Valid aid
Minimum User Level
Response Format
Example Command
Example Response
12778474-002-2 Revision F – March 2004
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
<cr><lf><lf>
M^ctag^COMPLD<cr><lf>
^^^aid:level,mode,bit<cr><lf>
where:
level is PRS|ST2|ST3|DUS|STU
mode is Auto or Provisioned
bit is the location of the bit (4–8) in Time Slot 0 word that
contains the E1 sync status message.
RTRV-PRMTR-REF:TSG::ctag;
TSG 02-09-10 19:00:19
M 13 COMPLD
^^^INP2:PRI,On,Off
;
RTRV-USER:[tid]::ctag;
none
3
<cr><lf><lf>
M^ctag^COMPLD<cr><lf>
^^^"user name,access level<cr><lf>
where:
user name is a 10-character user name
access level is 1, 2, 3, 4, where 4 is the administrator level
RTRV-USER:TSG::ctag;
TSG 02-09-10 19:00:19
M 13 COMPLD
^^^User,1
^^^Craft,2
^^^Supervisor,3
^^^Administrator,4
;
TL1 Reference
Retrieve Commands
TSG-3800 User's Guide 411