Command Selections; Displaying A List Of Commands; Terminal Display Variables - Symmetricom TSG-3800 Series User Manual

Table B-3. Terminal Display Variables
Variable
«date»
«time»
«port»
«input»
«clk»
«fg»
«reason»
«level»
«oper»
Note:
1
Display shows the default time and date if date and time have not been set.
2
Display shows the default time and date if date and time have not been set.

Command Selections

When a command applies to more than one item (for example, Input, Clock, or FG),
the operator chooses among them. Type the selection in the command line where
{select} appears.
In several commands, an input source is selectable. The input source selections are
INP1.1 through INP4.3. Without an input source specified, the TSG-3800 defaults to
all installed inputs.

Displaying a List of Commands

A help display is available. This command lists all root commands, for example,
PHASE. The HELP command may be used to display command specific help.
To access the help display, type
A typical display is:
TSG-> Help
12778474-002-2 Revision F – March 2004
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
1
Current date
2
Current time
COMA, COMB, Telnet (optional), Binary (optional)
Input signal. The value can be INP1.1 – INP1.3, INP2.1 – INP2.3,
INP3.1 – INP3.3, or INP4.1 – INP4.3; they describe the Input module
slot and channel of the input signal
Clock A or Clock B
Frame Generator A or Frame Generator B
Short statement describing an event
User Privilege Level (1-4)
Displays port ID
then press Enter.
HELP
System Administrator's Reference
Software Commands
Description
TSG-3800 User's Guide 325