Checking Instrument Status - Symmetricom TSG-3800 Series User Manual

Operating the TSG-3800
System Commands

Checking Instrument Status

You can display the instrument status using the Status command. Included in the
display is information on major or minor alarms, input error status for each channel,
and current oscillator operating mode.
Frequency and MTIE use the following abbreviations: 'Ok', 'Mon', 'Inh', 'Alm', and
'Flt'. 'Ok' signifies the input signal is operating within alarm limits. 'Mon' indicates
Input is O.K. but is set to Monitor Only Mode and will not be used as a reference.
'Inh' is displayed when the input alarm checking is inhibited. 'Alm' is displayed when
the input is in alarm but not faulted. 'Flt' is displayed when the input is faulted.
AIS, BPV, CRC, LOS, and OOF use the following abbreviations: 'E', 'A', and 'F'. 'E'
is displayed when the input signal is in episode and not faulted or alarmed. 'A' is
displayed when the input signal is in alarm but not faulted. 'F' is displayed when the
input signal is faulted.
To access the status data, type:
STATUS
A typical display is:
->STATUS
The Current Time is 29AUG2004 09:15:40.352
Port Type
1.1 3Port/E1
1.2 3Port/E1
1.3 3Port/E1
2.1 DS1
3.1 3Port/T1
3.2 3Port/T1
3.3 3Port/T1
4.1 Clock
106 TSG-3800 User's Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
then press Enter
MTIE
Status Phase 100/1K /10K
Ref 7 Ok /Ok /Ok
Mon 15 Ok /Ok /Ok
Mon -55 Ok /Ok /Ok
Ok 0 Ok /Ok /Ok
Ok 9 Ok /Ok /Ok
Mon -146 Ok /Ok /Ok
Dis 0 Ok /Ok /Ok
Flt -1232442 Ok /Flt
A B C L O
FREQ I P R O O
100/1K /10K S V C S F
Ok /Ok /Ok / / / /
Ok /Ok /Ok / / / /
Ok /Ok /Ok / / / /
Ok /Ok /Ok / / / /
Ok /Ok /Ok / / / /
Ok /Ok /Ok / / / /
Ok /Ok /Ok / / / /
Flt /Flt /Ok / / / /
12778474-002-2 Revision F – March 2004
SSM
PRS
ST2
STU
STU
PRS
ST2
STU
STU