Expansion Shelf Inter-Shelf Connections - Symmetricom TSG-3800 Series User Manual

Installing the TSG-3800
TSG-3800 Expansion Shelves
Note: A black line on the ribbon cable identifies pin 1. Be sure to
insert each cable connector with pin 1 connecting with pin 1 of the
main or expansion shelf connector.
Figure 2-19. Expansion Shelf Inter-shelf Connections
EMC Expansion Shelf Cabling
The TSG-3800EX Expansion shelf receives input signals from the TSG-3800E
through a cable assembly supplied with the expansion shelf. Remove the Bus
Termination assembly from connector J9 on the TSG-3800E and install it on J11 of
the TSG-3800EX (if it is the last in the daisy chain). Install the Cable Assembly
between connector J9 on the TSG-3800E and connector J1 on the TSG-3800EX.
Figure 2-20 illustrates the TSG-3800E and TSG-3800EX inter-shelf connections.
70 TSG-3800 User's Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
12778474-002-2 Revision F – March 2004