Other Commands; Activate User; Cancel User - Symmetricom TSG-3800 Series User Manual

Other Commands

Each command submitted by the user causes the TSG-3800 to respond with the
Complied message and a response message that contains the requested data.
Valid <tid> code: the assigned tid (see SET-TID; the default TID is TSG) or null. If
null, the TSG-3800 requires the <aid>.
Valid <aid> code:
Null (no characters). If null, the TSG-3800 requires the <tid>
ID00000

Activate User

The Activate User command logs in the user with the specified username and
password.
Command Syntax
Valid aid
Minimum User Level
Response Format
Example Command
Example Response

Cancel User

The Cancel User command logs off the current user and returns the TSG-3800 to
security level 0. port to ASCII mode, or disconnects an Ethernet session to end TL1
communication.
Command Syntax
Valid aid
Minimum User Level
Response Format
Example Command
Example Response
12778474-002-2 Revision F – March 2004
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
ACT-USER:[tid]:uid:ctag::pwd;
none
0
tsg->
ACT-USER:CRAFT:ctag:CRAFT;
tsg->
CANC-USER:[tid]::ctag;
none
all
N/A
CANC-USER:ctag;
N/A
TL1 Reference
Other Commands
TSG-3800 User's Guide 413