Retrieve Frequency Data; Retrieve Mtie Data - Symmetricom TSG-3800 Series User Manual

TL1 Reference
Retrieve Commands
Response Format
Example Command
Example Response

Retrieve Frequency Data

The Retrieve Frequency Data command reports the current 100, 1000, and 10000
second averages for the specified input. The frequency values are in ps/s. If you
specify more than one input (aid = All or <null>), the data for each input port is on a
separate line.
If the TSG-3800 successfully receives the command, it returns the COMPLD
message. If the TSG-3800 does not successfully receive the command, it returns
the DENY message.
Command Syntax
Valid aid
Minimum User Level
Response Format
Example Command
Example Response

Retrieve MTIE Data

The Retrieve MTIE Data command reports the current 100, 1000, and 10000
second MTIE measurements for the specified input, if they are available. The
frequency values are in nanoseconds. If you specify more than one input (aid = All
or <null>), the data for each input port is on a separate line.
If the TSG-3800 successfully receives the command, it returns the COMPLD
message. If the TSG-3800 does not successfully receive the command, it returns
the DENY message.
Command Syntax
Valid aid
394 TSG-3800 User's Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
<cr><lf><lf>
M^ctag^COMPLD<cr><lf>
^^^"aid:(cv1),(cv100),tau"<cr><lf>
RTRV-DATA-CLK:TSG:CLKA:ctag;
TSG 02-09-10 19:00:19
M 13 COMPLD
^^^TSG:0,5,3000
RTRV-DATA-FREQ:[tid]:[aid]:ctag;
INP, INPx, INPx[-y], ALL, <null>
1
<cr><lf><lf>
M^ctag^COMPLD<cr><lf>
^^^"aid:FREQ,(f100),(f1000),(f10000)"<cr><lf>
RTRV-DATA-FREQ:TSG:INP2:ctag;
TSG 02-09-10 19:00:19
M 13 COMPLD
^^^INP2:FREQ,158,204,212
RTRV-DATA-MTIE:[tid]:[aid]:ctag;
INP, INPx, INPx[-y], ALL, <null>
12778474-002-2 Revision F – March 2004