Installing The Cable Support Bar; Channel Output Signals For Panel And Connectors - Symmetricom TSG-3800 Series User Manual

Installing the TSG-3800
Input/Output Adapter Panels
Figure 2-22. Channel Output Signals for Panel and Connectors

Installing the Cable Support Bar

After installing the panel, secure and protect the cables on the panel. Perform the
following steps and use the supplied cable support bar (item number
00112914-000-1) and all necessary screws to install the cable support bar on the
equipment rack.
1. Align the holes in the bar with the holes on the equipment rack located
immediately above the unit or resident panel.
2. Fasten the bar to the side of the equipment rack using the screws and lock
washers provided.
76 TSG-3800 User's Guide
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Figure 2-23 shows a completed installation.
12778474-002-2 Revision F – March 2004