Model Designations; Multi-Winding Drive Unit Model Designation - YASKAWA Sigma-V Series User Manual

1 Outline

1.6.1 Multi-Winding Drive Unit Model Designation

1.6

Model Designations

1.6.1

Multi-Winding Drive Unit Model Designation

This section shows the multi-winding drive unit model designation.
JUSP
Series
Servo peripheral
JUSP
devices
1st + 2nd digits
Multi-winding drive unit
MD
3rd digit: Power Supply
(Maximum Applicable Motor)
75 kW
3
Note: When digits 8 to 13 are all zeros (0) in the model designation, the zeros are not shown.
1-14
1st + 2nd
digits
– MD
Capacity
Code
3rd 4th
5th + 6th
digit digit
digits
3
D 11 A
7th digit: Design
Revision Order
4th digit: Main Circuit Power
Supply Voltage
Voltage
DC power input from
D
separate 400-VAC converter
5th + 6th digits: Interface Specifications
Code Interface
MECHATROLINK-II
communications reference, rotational
11
servomotor
8th + 9th + 10th digits: Hardware Specifications
Code
000 Base-mounted (standard)
001 Duct-ventilated
002 Varnished
003 Duct-ventilated and varnished
7th 8th + 9th + 11th + 12th
digit 10th digits digits
000
00
13th digit: Parameter
Specification
Code
0
11th + 12th digits: Software
Specification
Code Specification
00 Standard
Specification
13th
digit
0
Specification
Standard