YASKAWA Sigma-V Series User Manual page 296

Parameter
Size
No.
2 Input Signal Selection 1
4th 3rd 2nd 1st
digit digit digit digit
n.    
Pn50A
Setting
Name
Range
0000 to
FFF1
Reserved (Do not change.)
Reserved (Do not change.)
Reserved (Do not change.)
P-OT Signal Mapping (Forward run prohibited when OFF (open))
0 Forward run allowed when CN1-40 input signal is ON (closed).
1 Forward run allowed when CN1-41 input signal is ON (closed).
2 Forward run allowed when CN1-42 input signal is ON (closed).
3 Forward run allowed when CN1-43 input signal is ON (closed).
4
Forward run allowed when CN1-44 input signal is ON (closed).
5
Forward run allowed when CN1-45 input signal is ON (closed).
6
Forward run allowed when CN1-46 input signal is ON (closed).
7
Forward run prohibited.
8 Forward run allowed.
9 Forward run allowed when CN1-40 input signal is OFF (open).
A Forward run allowed when CN1-41 input signal is OFF (open).
B Forward run allowed when CN1-42 input signal is OFF (open).
C Forward run allowed when CN1-43 input signal is OFF (open).
D Forward run allowed when CN1-44 input signal is OFF (open).
E Forward run allowed when CN1-45 input signal is OFF (open).
F Forward run allowed when CN1-46 input signal is OFF (open).
Factory When
Units
Setting Enabled
−
2881 After restart
9.1 List of Parameters
(cont'd)
Classi- Reference
fication Section
−
Setup
Reference
Section
4.3.2
9
9-15