Turning OFF the Machine
This section describes how to turn OFF the machine.
Check the machine's operation status before turning it OFF
The machine performs a procedure to protect the hard disk when the machine is shut down. You can turn OFF
the machine while a process is active, but the following types of problems may occur, which may cause you to
lose or damage data.
●
Do not turn OFF the machine while using the Fax/I-fax function. I-fax or fax documents cannot be sent or
received when the machine is turned OFF.
●
Do not turn OFF the machine if the <Backing up stored data from Remote UI...> message is displayed on the
touch panel display. Doing so may cause the machine to fail to back up the stored data.
●
Data stored in the machine may be damaged if the Advanced Box (shared storage of the machine) is
accessed by another Canon multifunction printer
OFF.
●
If the machine is turned OFF during scanning or printing, a paper jam may occur.
* Only for the imageRUNNER ADVANCE series connected with the network
●
You can shut down the machine from the Remote UI.
1
Open the power switch cover and press the power switch toward " ".
2
Close the power switch cover.
●
The machine may take some time to completely shut down. Do not unplug the power cord until the Main
Power indicator (
Basic Operations
Control Panel(P. 103) ) is turned off.
*
or a computer immediately before the machine is turned
Turning OFF/Restarting the Machine(P. 793)
107
4XR3-01X