Configuring System Data Communication
The settings described in this section are required to use the sub line for performing DNS name resolution and data
communication via a proxy. Administrator or NetworkAdmin privileges are required to specify these settings.
●
The DNS server address setting and proxy settings for the sub line can only be used for specific system data
communication. They cannot be used for a regular internet connection. When using a DNS server or proxy
server for the sub line for applications other than system data communication, register the addresses and
port numbers to use with the sub line in the settings of the main line.
Setting the DNS of the Sub Line(P. 69)
Proxy Settings of the Sub Line(P. 69)
Setting the DNS of the Sub Line
1
Press
.
2
Press <Preferences>
Communic.>
3
Specify the required settings.
●
Enter the IP address of the DNS server, according to your environment.
4
Press <OK>.
5
Press
<Yes>.
Proxy Settings of the Sub Line
1
Press
.
Setting Up
<Network>
<DNS Server Address Settings>.
<Sub Line Settings>
69
<Settings for System Data
4XR3-0XR