Making Smb Settings - Canon imageRUNNER ADVANCE C5560i III User Manual

Making SMB Settings

This section describes setup steps to share files and printers among multiple devices on the network utilizing the SMB
protocol.
Setting the SMB Server(P. 52)
Setting the SMB Client(P. 53)
Setting the SMB Server
Enabling the SMB server functions makes it possible for the Advanced Box to be used as a SMB file server.
1
Press .
2
Press <Preferences>
3
Select <On> in <Use SMB Server> and carry out the necessary setup.
<Use SMB Authentication>
User authentication is conducted by using user information in the Advanced Box. To conduct user
authentication, press <On>.
<Authentication Type>
Select the version of the authentication protocol. Select <NTLMv1> or <NTLMv2>, according to your
operating system. You can also select both.
<Require SMB Signature for Connection>
To set so that an SMB packet signature is requested when connecting to the SMB server, press <On>.
<Require Encryption for Connection>
To request a connection with SMB v3.0 encrypted communication when connecting to an SMB server,
press <On>.
4
Press <OK>.
5
Press <Specify SMB Server Version>, and select the version of SMB to use with the
SMB server.
Setting Up
<Network> <TCP/IP Settings>
52
<SMB Server Settings>.
4XR3-010