Making Ethernet Settings - Canon imageRUNNER ADVANCE C5560i III User Manual

Making Ethernet Settings

Ethernet is a standard that stipulates communication methods within a LAN. Normally, the communication system
(half-duplex/full-duplex) and Ethernet type (1000BASE-T/100BASE-TX/10BASE-T) can be set automatically. You can set
them separately by switching the setting to manual operation.
<Ethernet Driver Settings> exists for both the main line and sub line. Register the settings as necessary.
1
Press .
2
Press <Preferences>
● To specify the Ethernet settings for the sub line, press <Preferences>
<Ethernet Driver Settings>.
3
Make Ethernet settings.
● Normally, press <On> in <Auto Detect>. The communication system and Ethernet type are detected and
automatically configured.
Making Ethernet settings manually
1
Press <Off> in <Auto Detect>.
2
Select the communication system.
<Half Duplex>
Carry out send/receive functions alternately. Select this when the connected router is set for half-
duplex communication.
<Full Duplex>
Setting Up
<Network> <Ethernet Driver Settings>.
44
<Network> <Sub Line Settings>
4XR3-00W