Canon imageRUNNER ADVANCE C5560i III User Manual page 63

<IPv4>
● To automatically update the information when correspondence between the host name and the IP
address is changed in an environment such as DHCP, press <On> in <DNS Dynamic Update>.
<IPv6>
● To automatically update the information when correspondence between the host name and the IP
address is changed in an environment such as DHCP, press <On> in <DNS Dynamic Update>.
● Turn <On> the address you want to register as a DNS server in <Register Stateless Address>/<Register
Manual Address>/<Register Stateful Address>. Please note that automatic update cannot be carried
out if all are set to <Off>.
3
Press <OK>.
6
Specify the mDNS settings.
1
Press <mDNS Settings>.
2
Carry out the necessary settings.
<Use IPv4 mDNS>
● To enable the DNS function in an environment without a DNS server, press <On>.
● Press <mDNS Name>, and enter an mDNS name of your choice using alphanumeric characters.
<Use IPv6 mDNS>
● To enable the DNS function in an environment without a DNS server, press <On>.
● To set the same settings as IPv4 for the mDNS name, press <On> for <Use Same mDNS Name as
IPv4>. To use different settings, press <mDNS Name> and enter an mDNS name of your choice using
alphanumeric characters.
● If you set <Use IPv4 mDNS> to <On>, the machine will not completely enter the Sleep mode.
● If you set <Use IPv6 mDNS> to <On>, the machine will not completely enter the Sleep mode.
3
Press <OK>.
Setting Up
49